 |
Supports
data rates up to 5.0 Mbits/sec |
|
"Peer-to-peer"
communications system allows every node to transmit data
to other nodes on the |
|
network |
|
No
master controller required. Co-processor provides local
intelligence using SYPT programs. |
|
"Easy
Mode" set-up allows cyclic data transfer of up-to 3
parameters in and out, to be configured |
|
using drive
parameters from keypad |
|
Full
cyclic and non-cyclic transfers are configurable from SYPT |
|
Fast
cyclic data channel, transmits data on a configurable
time-base, ranging from 1 ms to 99 ms |
|
Slow
cyclic data channel, transmits data every 2 to 19 cycles
of the fast data channel |
|
Up
to 10 cyclic data links may be defined per node |
|
Non-cyclic
data channel allows a periodic communications between any
two nodes |
|
Cyclic
and non-cyclic data can be "broadcast" to all
other nodes |
|
Up
to 20 registers may be transferred on a single fast or
slow data link |
|
|
 |
|
| Network |
|
RS485
transformer-isolated physical layer |
|
Data
rates from 1.25 Mbits/sec to 5.0 Mbits/sec |
|
Up
to 100m network length at 5.0 Mbits/sec |
|
Up
to 200m network length at 2.5 Mbits/sec |
|
Up
to 20 nodes without network repeaters |
|
|
| Environment |
|
Ambient
Temperature: -5ºC to +40ºC |
|
Storage
Temperature: -40ºC to +50ºC |
|
Weight:
172g |
|
Maximum
Altitude: 4000 m |
|
Humidity:
+5% to +95% at 40ºC non-condensing |
|
|
